Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

show cdp neighbor details; entry address

Hi,

Is there any criteria used to select the Entry address in show cdp neighbor details?

thanks

Devang Patel

1 REPLY
Bronze

Re: show cdp neighbor details; entry address

show cdp neighbors

To display detailed information about neighboring devices discovered using Cisco Discovery Protocol, use the show cdp neighbors command in privileged EXEC mode.

show cdp neighbors [type number] [detail]

Syntax Description

type (Optional) Interface type that is connected to the neighbors about which you want information; possible valid values are ethernet, fastethernet, gigabitethernet, tengigabitethernet, port-channel, and vlan.

number (Optional) Number of the interface connected to the neighbors about which you want information.

detail (Optional) Displays detailed information about a neighbor (or neighbors) including network address, enabled protocols, hold time, and software version.

Usage Guidelines

The vlan keyword is supported in Catalyst 6500 series switches that are configured with a Supervisor Engine 2.

The port-channel values are from 0 to 282; values from 257 to 282 are supported on the call switching module (CSM) and the firewall services module (FWSM) only.

494
Views
0
Helpful
1
Replies