Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

show controllers ethernet-controller output

Hi,

I'm getting the following included in the output of a 'show controllers ethernet-controller gi0/1' command:

24232 0 Addr Cmp frames

10392864 1 Addr Cmp frames

23787137 2 Addr Cmp frames

It's a trunk port connected to a WS-C3524-XL, but I can't find in anywhere in the documentation on Cisco.com that actually explains what these counters are. Can anyone enlighten me?

Cheers,

Steve

2 REPLIES
Bronze

Re: show controllers ethernet-controller output

CMP refers to the Cluster Management Protocol. Looks like you have configured clusting on this device. This document might help: http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00801347f8.shtml

New Member

Re: show controllers ethernet-controller output

Thanks for your response - unfortunately I inherited this set up from elsewhere. The link looks useful though.

Am I right in thinking that Cisco does not recommend using Clustering these days?

Cheers,

Steve

343
Views
4
Helpful
2
Replies
CreatePlease to create content