Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

show ip bgp output

What does Local mean in this output?

R4#show ip bgp 10.6.0.0/24
BGP routing table entry for 10.6.0.0/24, version 19
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
        2
  Local    192.168.0.6 (metric 156160) from 192.168.0.5 (192.168.0.5)
      Origin IGP, metric 0, localpref 100, valid, internal, best
      Originator: 192.168.0.6, Cluster list: 192.168.0.5
3 REPLIES
New Member

show ip bgp output

Can any expert help me understand what is the meaning of Local in the above output? Thanks.

New Member

show ip bgp output

It means that the prefix is locally generated.

Can you please paste o/p of 'show run | sec bgp'

show ip bgp output

Kashish,

R4#show ip bgp 10.6.0.0/24
BGP routing table entry for 10.6.0.0/24, version 19
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
        2
  Local    192.168.0.6 (metric 156160) from 192.168.0.5 (192.168.0.5)
      Origin IGP, metric 0, localpref 100, valid, internal, best
      Originator: 192.168.0.6, Cluster list: 192.168.0.5

Local means that it was learned from an ibgp neighbor. Since you have a cluster list appended, it would indicate that this is a route reflector client. The next hop is 192.168.0.5 and the advertising router is 192.168.0.6 (the Originator).

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
253
Views
0
Helpful
3
Replies