Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

show platform port-asic stat drop on non-master switch

I have a 2 switch, 3750 stack. Switch 1 is the master. I have QOS enabled. When I enter the following command:

show platform port-asic stats drop fastEthernet 1/0/1

it works, but if I enter the command

show platform port-asic stats drop fastEthernet 2/0/1

I receive the following error:

%Command Rejected: interface 'FastEthernet2/0/1' is not local port

How do I look at port drops for a non-maser switch in a stack?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: show platform port-asic stat drop on non-master switch

You need to prefix the command with 'remote command x' where 'x' is the stack member. For example:

remote command 2 show platform port-asic stats drop fastethernet 2/0/1

In the latest 12.2(50)SE IOS the drop and enqueue stats from these commands are included in the 'show mls qos interface statistics' command.

HTH

Andy

2 REPLIES

Re: show platform port-asic stat drop on non-master switch

You need to prefix the command with 'remote command x' where 'x' is the stack member. For example:

remote command 2 show platform port-asic stats drop fastethernet 2/0/1

In the latest 12.2(50)SE IOS the drop and enqueue stats from these commands are included in the 'show mls qos interface statistics' command.

HTH

Andy

New Member

Re: show platform port-asic stat drop on non-master switch

Brilliant! Thanks!

1623
Views
5
Helpful
2
Replies
CreatePlease login to create content