Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

show reliability best for trafficmonitoring?

Im looking at a fe0/0 interface on my router right now via prtg traffic monitoring. It is showing me bandwidth of around 6mb. However teh serial interface going out is less than 1mb

The fe0/0 is connected to a 2950 switch.

I issued sh int | include reliability

to see what the "top talker" was and none of the interfaces look like they are casuing alot of traffic...am i missing something?

2950#sh int | include reliability

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 12/255, rxload 10/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 6/255, rxload 12/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 5/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 5/255, rxload 5/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

reliability 255/255, txload 1/255, rxload 1/255

1 REPLY
New Member

Re: show reliability best for trafficmonitoring?

2950#sh int fastEthernet 0/5

Description Connection to Router

FastEthernet0/5 is up, line protocol is up (connected)

Hardware is Fast Ethernet, address is 0011.bbff.61c5 (bia 0011.bbff.61c

MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,

reliability 255/255, txload 15/255, rxload 13/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

Full-duplex, 100Mb/s

input flow-control is unsupported output flow-control is unsupported

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:23, output 00:00:00, output hang never

Last clearing of "show interface" counters 00:00:46

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 5200000 bits/sec, 738 packets/sec

5 minute output rate 5927000 bits/sec, 974 packets/sec

37521 packets input, 36469479 bytes, 0 no buffer

Received 27 broadcasts (0 multicast)

0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog, 27 multicast, 0 pause input

0 input packets with dribble condition detected

47616 packets output, 42228499 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier, 0 PAUSE output

0 output buffer failures, 0 output buffers swapped out

Router#sh interfaces fastEthernet 0/0

Description Connection to LAN

FastEthernet0/0 is up, line protocol is up

Hardware is AmdFE, address is 000c.8542.12c0 (bia 000c.8542.12c0)

Internet address is 192.168.1.250/24

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

reliability 255/255, txload 13/255, rxload 15/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

Full-duplex, 100Mb/s, 100BaseTX/FX

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters 00:03:29

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue :0/40 (size/max)

5 minute input rate 5972000 bits/sec, 975 packets/sec

5 minute output rate 5274000 bits/sec, 756 packets/sec

208074 packets input, 170395111 bytes

Received 1295 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog

0 input packets with dribble condition detected

162985 packets output, 149453437 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

698
Views
0
Helpful
1
Replies