Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

show spantree command!!!

i wanna to know the output of "show spantree command" in a Network which have 3 switches and 3 VLANs ...and each individual switch

is a Root Bridge of each different VLAN...lets say Switch A is a Root bridge for VLAN1 Switch B is root bridge for vlan 2 and so on..onething more all three the switches r connected in triangle shape.

plz plz plz paste the output of show spantree...im aware of everything of STP..so dont teach me anything abt STP..as i dont have devices with me..i just wannato check whether wut im thinking is going to be correct or not!!!

1 REPLY
Silver

Re: show spantree command!!!

To know the status of each vlan use the command show spantree .With this command we could know status of each vlan. For Sample output refer the following URL

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_1/cmd_ref/sh_sp_te.htm#12352

188
Views
0
Helpful
1
Replies
CreatePlease to create content