Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

show users command on cisco router

Hi everybody.

Let say we have a followng scenario:

pc------R1------R2- console-----User2

Let say a user zee telnets into R1 from pc.

While at R1, telnet into R2. Once at R2, zee suspends the telnet to R2 by using ctrl-shift 6 X, and goes back to R1 prompt i.e R1>.

Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?

thanks a lot.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: show users command on cisco router

Sarah

"Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?"

Yes it will.

Jon

1 REPLY
Hall of Fame Super Blue

Re: show users command on cisco router

Sarah

"Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?"

Yes it will.

Jon

937
Views
0
Helpful
1
Replies
CreatePlease to create content