Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Simple smart call home setup for my cat 6500

Hi

I would like to set up a simple smart call home on my cat 6500 to inform me of any hardware issues, or ports going down etc.

Can anyone paste an example of there script on here that I can copy, with a description of what it does.

Many thanks

Carl

3 REPLIES

Re: Simple smart call home setup for my cat 6500

Hi

I would like to set up a simple smart call home on my cat 6500 to inform me of any hardware issues, or ports going down etc.

Can anyone paste an example of there script on here that I can copy, with a description of what it does.

Many thanks

Carl

Hi Carl,

To achive this the  best way is to have syslog server configured and send all the trap messages to syslog server and from syslog intergarte that with smtp server to send mail to following receipent on the basis of messages.

Hope to Help

Ganesh.H

New Member

Re: Simple smart call home setup for my cat 6500

Hi there

I would like to use the smart call home as we dont have a good monitoring station for this, Do you have a template for the smart call home ?

Re: Simple smart call home setup for my cat 6500

Hi there

I would like to use the smart call home as we dont have a good monitoring station for this, Do you have a template for the smart call home ?

Hi,

Check out the below link hope to help !!

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/callhome.html

Ganesh.H

249
Views
0
Helpful
3
Replies