Disabled SIP on 3745 via the sip-ua no transport udp, no tranport tcp commands. We wanted to disable SIP to stop %SIP-3-UNSUPPORTED: Unsupported ptime value log messages b/c we do not need SIP in our config. The show tcp brief and show ip sockets confirm that the router is no longer listening on port 5060. But I still see SIP info when I do show proc | incl SIP. Why do I still see this info is SIP is disabled? Thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...