Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SLB configuration

Hi everybody

we have too many servers in our office.

we want to have 1 ip with load balancing for example for 2 application servers . so, i\our goal is if we call this ip address, the load balancer divide the request between these servers.

I think SLB is one of the solutions,but we have 4503 switch , that I think SLB support only in 6500 series.

could you pls guide me for another solution.

thanks

ladan

2 REPLIES
Silver

Re: SLB configuration

SLB is a good choice.

Try the 4840G SLB Switch in this case . It's a good one.

For more details refer the following url,

http://cisco.com/en/US/docs/switches/lan/catalyst4840g/12.0_10_w5_18/release/note/rn104231.html

Silver

Re: SLB configuration

Hi ladan,

SLB is not a feature only for 6500 (but 6500 works with SLB in hardware ..)

HTH

Andrea

139
Views
0
Helpful
2
Replies