que puedo conectar en los puertos 25 y 26 de un SLM2024T-xx SG200-26, tengo entendido que son de expansion, por ejemplo el 25 al modem o ruteador y el 26 a otro switch, es cierto esto? y que tipo de configuracion es el cable? cruzado o normal B? gracias
what can i connect to ports 25 and 26 of a SLM2024T SG200-26, I have understood that they are of expansion, such as the modem or router in 25 and 26 to another switch, is this true? and what kind of setup is the cable? crossover or normal B? thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...