Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Slow File Transfer Performance


In our environment we use Cisco 3560x series switches for servers.

Switch Ports Model              SW Version            SW Image                

------ ----- -----              ----------            ----------              

*    1 54    WS-C3560X-48       12.2(53)SE2           C3560E-UNIVERSALK9-M   

All ports have speed 1000 and duplex full configuration. On the same switch when we copy file test between windows servers , speed is normal (single file 5 gb approximately 80 seconds ). But when we test with linux or solaris servers, we maximum see  14 - 30 mb/s (single file) .For gigabit performance i think its bad.

What do you suggest to fix this issue ?


Best regards

Everyone's tags (4)
Cisco Employee

Slow File Transfer Performance

I would go first for a sniffer trace (via SPAN/monitor session). This will tell you if 'slowness' is due to inter-packet delay or packet loss. If it's due to packet loss (i.e. if there are restransmission), look for interface stats/errors at interface level.

If it's interpacket delay, troubleshooting is much more complex and could have various causes (like buffer allocation problem,etc...). Best is to investigate this via a TAC Service Request in that later case.  



Super Bronze

Slow File Transfer Performance


The    Author of this posting offers the information contained within this    posting without consideration and with the reader's understanding that    there's no implied or expressed suitability or fitness for any  purpose.   Information provided is for informational purposes only and  should not   be construed as rendering professional advice of any kind.  Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In    no event shall Author be liable for any damages whatsoever  (including,   without limitation, damages for loss of use, data or  profit) arising  out  of the use or inability to use the posting's  information even if  Author  has been advised of the possibility of such  damage.


No possible duplex mismatch between switch and servers?