Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SM-ES3G-24-P Module with 2900 Router

Hello,

I'm trying to configure some switching here. I have 2900 Router(ios ver 15.0) and put SM Module in that router.

I would like to know how to configure that Module to work as a switch?

Very Much appreciate your help!

Sincerely,

Andrew

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Blue

Re: SM-ES3G-24-P Module with 2900 Router

Andrewkai wrote:

Hello,

I'm trying to configure some switching here. I have 2900 Router(ios ver 15.0) and put SM Module in that router.

I would like to know how to configure that Module to work as a switch?

Very Much appreciate your help!

Sincerely,

Andrew

Andrew

Use this configuration guide to get started -

http://www.cisco.com/en/US/customer/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1919696

Jon

Re: SM-ES3G-24-P Module with 2900 Router

Hi Andrew,

Answer is given in step13:

Step 13

control+shift+6 x

Example:

Switch# control+shift+6 x

Returns you to the router console while keeping the console session to the switch

Keep pressing control+sift+6 and then press x key from key board

Or you can try ctrl+ccc (not sure whether this works or not)

Regards

Mahesh

4 REPLIES
Hall of Fame Super Blue

Re: SM-ES3G-24-P Module with 2900 Router

Andrewkai wrote:

Hello,

I'm trying to configure some switching here. I have 2900 Router(ios ver 15.0) and put SM Module in that router.

I would like to know how to configure that Module to work as a switch?

Very Much appreciate your help!

Sincerely,

Andrew

Andrew

Use this configuration guide to get started -

http://www.cisco.com/en/US/customer/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1919696

Jon

New Member

Re: SM-ES3G-24-P Module with 2900 Router

Hi Jon,

I followed that doc and I can access to the switch module using command #service module gi 1/0 session

Then I reached to switch#....

From there I can use like a switch to that module. But the problem is How to get out form the switch module.

I want to go back to router login page.

Please advise.. Thanks for your help.

Sincerely,

Andrew

Re: SM-ES3G-24-P Module with 2900 Router

Hi Andrew,

Answer is given in step13:

Step 13

control+shift+6 x

Example:

Switch# control+shift+6 x

Returns you to the router console while keeping the console session to the switch

Keep pressing control+sift+6 and then press x key from key board

Or you can try ctrl+ccc (not sure whether this works or not)

Regards

Mahesh

New Member

Re: SM-ES3G-24-P Module with 2900 Router

Big thanks Mahesh! I can get out form there.

I used ctrl+shift+6+ X and clear the line 1/0 as follow

switch# press ctrl shift 6 x

Router#sh session

          #Clear line 1/0

Cheer!

Andrew

3947
Views
0
Helpful
4
Replies