Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Small network with 2 router and 42 layer 2 switches

I have 2 router with 2 WIC 2 T & HWIC 4 T

1st router will connect to 2 deferent ISP with connection 6 m to support customer to access the web server

2nd router will connect to 2 deferent ISP with connection 8 m

To support the customer to access web server>>>>>>>>>>>>>>>>>.

I need to know if I configure VTP domain I need to know the maximum support client switches in this VTP domain >>>>>

1-I need to make load balance between to router

2- I need at lest 12 m to customer to access the web server

3- I need 2 m for user in internal network to can reache the internet

4- I need to configure 10 VLAN

I need solution for configuration

1 REPLY
Silver

Re: Small network with 2 router and 42 layer 2 switches

Load balancing are being different way as per which protocol you are using in your routing. Here is the some URL which will help you for load balancing purpose:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094820.shtml#topic1

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00800945bf.shtml

For the configuration VLAN follow the URl:

http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a008009478e.shtml

105
Views
0
Helpful
1
Replies
CreatePlease to create content