Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Smart Install Image Upgrade Failure: Director (4516-X) and client (2960c).


Here's the "show vstack config from the Director:

Director#show vstack config
Role: Director (SmartInstall enabled)
Vstack Director IP address:
Vstack Mode: Basic
Vstack default management vlan: 1
Vstack start-up management vlan: 1
Vstack management Vlans: none
Vstack Config file: bootflash:default_configuration.txt
Vstack Image file: bootflash:c2960c405-universalk9-tar.152-1.E2.tar
Join Window Details:
         Window: Open (default)
         Operation Mode: auto (default)
Vstack Backup Details:
         Mode: On (default)
         Repository: bootflash:/vstack (default)


On the client, I see the following during the auto install process:

00:01:32: AUTOINSTALL: Vlan1 is assigned
00:01:32: AUTOINSTALL: Obtain tftp server address (opt 150)
00:01:32: AUTOINSTALL: Obtain default router (opt 3)
Loading client_cfg.txt from (via Vlan1): !
[OK - 90 bytes]
Trying, 41658 ... Open

[Connection to closed by foreign host]
00:01:43: %SYS-5-CONFIG_I: Configured from tftp:// by console


Director#show vstack download-status detail
SmartInstall:  ENABLED

No 1:
client-mac: 0024.5179.b000
method: zero-touch
config-fail-reason: NA
image-fail-reason: Archive download failure

Hall of Fame Super Gold

I want to see your entire

I want to see your entire SmartInstall config.  Post your "sh version" as well.  

Loading client_cfg.txt from (via Vlan1): !

Can you please confirm that the 2960CG configuration template is NOT "client_cfg.txt".


Can I also ask if you can provide the output to the command "sh vstack status"?

CreatePlease to create content