Here's the "show vstack config from the Director:
Director#show vstack config
Role: Director (SmartInstall enabled)
Vstack Director IP address: 1.1.1.20
Vstack Mode: Basic
Vstack default management vlan: 1
Vstack start-up management vlan: 1
Vstack management Vlans: none
Vstack Config file: bootflash:default_configuration.txt
Vstack Image file: bootflash:c2960c405-universalk9-tar.152-1.E2.tar
Join Window Details:
Window: Open (default)
Operation Mode: auto (default)
Vstack Backup Details:
Mode: On (default)
Repository: bootflash:/vstack (default)
On the client, I see the following during the auto install process:
00:01:32: AUTOINSTALL: Vlan1 is assigned 1.1.1.1
00:01:32: AUTOINSTALL: Obtain tftp server address (opt 150) 1.1.1.20
00:01:32: AUTOINSTALL: Obtain default router (opt 3) 1.1.1.20
Loading client_cfg.txt from 1.1.1.20 (via Vlan1): !
[OK - 90 bytes]
Trying 1.1.1.20, 41658 ... Open
[Connection to 1.1.1.20 closed by foreign host]
00:01:43: %SYS-5-CONFIG_I: Configured from tftp://1.1.1.20/client_cfg.txt by console
Director#show vstack download-status detail
SmartInstall: ENABLED
No 1:
client-ip: 1.1.1.1
client-hostname:
client-mac: 0024.5179.b000
method: zero-touch
config-fail-reason: NA
image-fail-reason: Archive download failure
