11-14-2011 10:53 AM - edited 03-07-2019 03:23 AM
Hello
For some unknown reason our NMS cannot validate SNMP string configured on catalyst switch 4507. SNMP version is 2c
snmp-server community ciscoRO RO
snmp-server community ciscoRW RW
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps entity
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps config
snmp-server enable traps hsrp
snmp-server enable traps syslog
There is Reachability between NMS server and switch but snmp string is not validating.
Hope to get help
thanks
ST
11-14-2011 10:59 AM
Hi ST,
Try adding this command and test again
snmp-server host host
HTH
11-14-2011 11:13 AM
I check with command
snmp-server host 192.168.100.10
not validating still ; couple of options available on doing ?
snmp-server host 192.168.100.10 ?
WORD SNMPv1/v2c community string or SNMPv3 user name
informs Send Inform messages to this host
traps Send Trap messages to this host
version SNMP version to use for notification messages
vrf VPN Routing instance for this host
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: