Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP - MIB

Hi NetPro.

would it be possible if i wanna configure the switch to send alert / alarm while the CPU Utilization hit to 50% - 80% to my monitoring server ?

i have check with the monitoring administrator , he was mentioned must give him " MIB " . thus i am wondering where and how can i get this mib file for him ?

appreciate your reply . thanks netpro.

jack

2 REPLIES

Re: SNMP - MIB

You can use RMON for this;

http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml

Something for cpmCPUTotalMonIntervalValue (OID

1.3.6.1.4.1.9.9.109.1.1.1.1.10) is probably what you want...

rmon event # log trap

description

owner

rmon alarm # .1.3.6.1.4.1.9.9.109.1.1.1.1.10.x absolute

rising-threshold xxxx falling-threshold xxxx owner

cpmCPUTotalMonIntervalValue OBJECT-TYPE

SYNTAX Gauge32 (0..100)

UNITS "percent"

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The overall CPU busy percentage in the last

cpmCPUMonInterval period.

This object deprecates the object cpmCPUTotal5secRev."

::= { cpmCPUTotalEntry 10 }

New Member

Re: SNMP - MIB

Hi Lavramov.

Good Day, would you mind to guide me the easiest way ? as i have tried out but don't seems to be work.

Switch Portion :

i want to monitor the CPU utilization if CPU hit to 30% - 50%. then it will trigger the alarm and send to Netview.

so, what should i configure into the Switch ? currently i have configured this to my switch but dont think it's work.

rmon event 1 log trap public description " CPU Util Above 30% " owner config

rmon event 2 log trap public description " CPU Util Below 50% " owner config

rmon alarm 1 lsystem.56.0 60 absolute rising-threshold 50 1 falling-threshold 30 2 owner config

rmon alarm 2 lsystem.8.0 60 absolute rising-threshold 480000000 falling-threshold 400000000 3 owner config

Your reply will be highly appreciated.

346
Views
9
Helpful
2
Replies