Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

snmp on router

hi,

i want ask about if it's possible to configure snmp on router for sending trap when there is a modification on his config.

if yes how can i do this.

thanks.

2 REPLIES
Cisco Employee

Re: snmp on router

I think you can do this by using " snmp-server enable traps config " command. This will send the SNMP trap whenever there is a config change.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008021de3e.shtml

HTH,Please rate if it does.

-amit singh

Silver

Re: snmp on router

Configuration change log is notification level.

You can configure router to send syslog traps by using:

logging trap notifications

logging 10.0.0.1

Where 10.0.0.1 is your syslog server or some trap evaluator. Any device you want to send your syslog traps to.

99
Views
0
Helpful
2
Replies
CreatePlease login to create content