Hi , we have a Cisco NX-OS(tm) n5000 and we configured the snmp community but,
If I get a snmpwalk on the ethernet interface that is working, the output is always 0.
This is my query snmp:
[root@host ~]# snmpget -v1 -ccomm sw-host ifInOctets.436211712
IF-MIB::ifInOctets.436211712 = Counter32: 0
But on the switch i have traffic:
SW1-NX# sh int e1/2 | grep second
30 seconds input rate 80 bits/sec, 0 packets/sec
30 seconds output rate 72072 bits/sec, 48 packets/sec
We would like to graph the ethernet interfaces, any idea, wrong mib ?
Gian Paolo
