Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP returning more then 52 ports on sg500

I have a SG500-52 from cisco. that looks like it has 52 ports.

But, when I snmp poll it, ifName returns 439 interfaces.

IF-MIB::ifName.434 = STRING: gi4/2/52

I'm not stacking 4 switches, so I'm not sure why the SG500-52 on SNMP is returning gi4/2/52 when is should only return

gi1/1/52

IF-MIB::ifName.52 = STRING: gi1/1/4

IF-MIB::ifName.100 = STRING: gi1/1/52

IF-MIB::ifName.152 = STRING: fa2/2/42

IF-MIB::ifName.210 = STRING: gi2/1/52

IF-MIB::ifName.252 = STRING: fa3/2/32

IF-MIB::ifName.320 = STRING: gi3/1/52

IF-MIB::ifName.352 = STRING: fa4/2/22

IF-MIB::ifName.430 = STRING: gi4/1/52

It's a non stacked 52 port switch.

Thanks.

130
Views
0
Helpful
0
Replies