Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

snmp-server enable traps bridge

Hi.

I am trying to enable SNMP traps for STP topology updates.

Is the following trap sufficient?

snmp-server enable traps bridge

I have read other posts indicating to use newroot and topologychange commands but neither of these are available on my switch.

Cisco 4000 L3 Switch. IOS 12.1

Thanks.

1 REPLY
Silver

Re: snmp-server enable traps bridge

I think 12.1 version supports only following features for STP SNMP trap

snmp-server enable traps :

To enable SNMP notifications (traps or informs), use the snmp-server enable traps command. To disable all SNMP notifications, use the no form of this command.

snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification [change | move | threshold]

no snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification]

if you want more features you should upgrade the higher versions.

946
Views
0
Helpful
1
Replies