SNMP traps are sent in spite of configuring The command "no snmp trap link"
The module in slot 2 is:
WS-X6724-SFP
and the interface Gi2/233 says:
Full-duplex, 1000Mb/s, media type is LH
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB0925045Q
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD0923030C
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAD092308DB
7 2 IPSec VPN Accelerator WS-SVC-IPSEC-1 SAD0925055C
9 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL09243AS8
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0014.692a.e2b0 to 0014.692a.e2ef 2.0 12.2(18)SXD6 12.2(18)SXD6 Ok
2 0012.80c8.8c34 to 0012.80c8.8c4b 2.2 12.2(14r)S5 12.2(18)SXD6 Ok
5 0011.5cb4.c958 to 0011.5cb4.c95b 4.4 8.5(1) 12.2(18)SXD6 Ok
7 0014.6a7f.718c to 0014.6a7f.718f 1.3 7.2(1) 8.3(0.156)RO Ok
9 0014.6a4b.6ce0 to 0014.6a4b.6d0f 2.2 12.2(14r)S5 12.2(18)SXD6 Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
2 Centralized Forwarding Card WS-F6700-CFC SAD092303TY 2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3B SAD092301JM 2.1 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD0922083Z 2.3 Ok
9 Centralized Forwarding Card WS-F6700-CFC SAD092303SA 2.0 Ok
Mod Online Diag Status
--- -------------------
1 Pass
2 Pass
5 Pass
7 Pass
9 Pass
