Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

snmp traps for outputdrops,crc errors , link status

Hello all,

I would like to know how snmp traps can be enabled on the interfaces for output drops/ crc errors / link status ( on ethernet). I need to do this on 45xx and 65xx series switches connecting to the servers. This is to monitor the ports connecting to the servers

1 REPLY
Cisco Employee

Re: snmp traps for outputdrops,crc errors , link status

Hi.

I think the most helpful thing I can do for you is to provide you with these links:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml

and

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa1.shtml

If you have any specific questions, feel free to ask.

HTH,

-Joe

179
Views
0
Helpful
1
Replies
CreatePlease to create content