Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SNMP

Hi,

While running snmpwalk what feelds shall we need to find out.

Commands is #snmpwalk <device name> ROcommunity

Regards,

Naidu.

2 REPLIES
Community Member

Re: SNMP

Hi,

I use this

$ snmpwalk -v 1 -c -One iso | more

Gives you a breakdown or you can remove the " | more" to let it do its thing.

Andy

Community Member

Re: SNMP

Hi Andy,

Ok thanks for the response on my post.

After excute the snmpwalk comand I got the below message, so my question is what fields shall I have to verify.

change @ d99h01 1: snmpwalk genwriUSlynchburg001 nuv0werk5

system.sysDescr.0 = "Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9_S NA-M), Version 12.4(15)T5, RELEASE SOFTWARE (fc4)..Technical Support: http://www .cisco.com/techsupport..Copyright (c) 1986-2008 by Cisco Systems, Inc...Compiled Wed 30-Apr-08 22:52 by prod_rel_tea"

system.sysObjectID.0 = OID: enterprises.9.1.222

system.sysUpTime.0 = Timeticks: (165496694) 19 days, 3:42:46.94

system.sysContact.0 = "Genworth Financial Network Operations 800.846.4595"

system.sysName.0 = "riUSlynchburg001.genworth.net"

system.sysLocation.0 = "700 MAIN ST, LYNCHBURG, VA 24504"

system.sysServices.0 = 78

system.sysORLastChange.0 = Timeticks: (0) 0:00:00.00

interfaces.ifNumber.0 = 22

interfaces.ifTable.ifEntry.ifIndex.1 = 1

interfaces.ifTable.ifEntry.ifIndex.2 = 2

interfaces.ifTable.ifEntry.ifIndex.3 = 3

interfaces.ifTable.ifEntry.ifIndex.4 = 4

interfaces.ifTable.ifEntry.ifIndex.5 = 5

interfaces.ifTable.ifEntry.ifIndex.6 = 6

interfaces.ifTable.ifEntry.ifIndex.7 = 7

interfaces.ifTable.ifEntry.ifIndex.8 = 8

interfaces.ifTable.ifEntry.ifIndex.9 = 9

interfaces.ifTable.ifEntry.ifIndex.10 = 10

interfaces.ifTable.ifEntry.ifIndex.11 = 11

interfaces.ifTable.ifEntry.ifIndex.12 = 12

interfaces.ifTable.ifEntry.ifIndex.13 = 13

interfaces.ifTable.ifEntry.ifIndex.14 = 14

interfaces.ifTable.ifEntry.ifIndex.15 = 15

interfaces.ifTable.ifEntry.ifIndex.17 = 17

interfaces.ifTable.ifEntry.ifIndex.18 = 18

interfaces.ifTable.ifEntry.ifIndex.19 = 19

interfaces.ifTable.ifEntry.ifIndex.20 = 20

interfaces.ifTable.ifEntry.ifIndex.21 = 21

interfaces.ifTable.ifEntry.ifIndex.22 = 22

interfaces.ifTable.ifEntry.ifIndex.23 = 23

interfaces.ifTable.ifEntry.ifDescr.1 = "Serial1/0"

interfaces.ifTable.ifEntry.ifDescr.2 = "FastEthernet2/0"

interfaces.ifTable.ifEntry.ifDescr.3 = "FastEthernet2/1"

interfaces.ifTable.ifEntry.ifDescr.4 = "Serial4/0"

interfaces.ifTable.ifEntry.ifDescr.5 = "FastEthernet5/0"

interfaces.ifTable.ifEntry.ifDescr.6 = "FastEthernet5/1"

interfaces.ifTable.ifEntry.ifDescr.7 = "ATM6/0"

interfaces.ifTable.ifEntry.ifDescr.8 = "GigabitEthernet0/1"

interfaces.ifTable.ifEntry.ifDescr.9 = "FastEthernet0/2"

interfaces.ifTable.ifEntry.ifDescr.10 = "GigabitEthernet0/2"

interfaces.ifTable.ifEntry.ifDescr.11 = "GigabitEthernet0/3"

interfaces.ifTable.ifEntry.ifDescr.12 = "TokenRing3/0"

interfaces.ifTable.ifEntry.ifDescr.13 = "TokenRing3/1"

interfaces.ifTable.ifEntry.ifDescr.14 = "TokenRing3/2"

interfaces.ifTable.ifEntry.ifDescr.15 = "TokenRing3/3"

interfaces.ifTable.ifEntry.ifDescr.17 = "Null0"

interfaces.ifTable.ifEntry.ifDescr.18 = "ATM6/0-atm layer"

interfaces.ifTable.ifEntry.ifDescr.19 = "ATM6/0.0-atm subif"

interfaces.ifTable.ifEntry.ifDescr.20 = "ATM6/0-aal5 layer"

interfaces.ifTable.ifEntry.ifDescr.21 = "ATM6/0.0-aal5 layer"

interfaces.ifTable.ifEntry.ifDescr.22 = "Loopback1"

interfaces.ifTable.ifEntry.ifDescr.23 = "Loopback129"

interfaces.ifTable.ifEntry.ifType.1 = propPointToPointSerial(22)

interfaces.ifTable.ifEntry.ifType.2 = ethernet-csmacd(6)

interfaces.ifTable.ifEntry.ifType.3 = ethernet-csmacd(6)

interfaces.ifTable.ifEntry.ifType.4 = propPointToPointSerial(22)

interfaces.ifTable.ifEntry.ifType.5 = ethernet-csmacd(6)

interfaces.ifTable.ifEntry.ifType.6 = ethernet-csmacd(6)

interfaces.ifTable.ifEntry.ifType.7 = ds3(30)

interfaces.ifTable.ifEntry.ifType.8 = ethernet-csmacd(6)

interfaces.ifTable.ifEntry.ifType.9 =

Regards,

Naidu.

186
Views
0
Helpful
2
Replies
CreatePlease to create content