Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP

Does Cisco SG200-50 50 port gigabit smart switch have support for SNMP ? I have updated the firmware and still can not find any option for snmp.

Sent from Cisco Technical Support iPad App

  • LAN Switching and Routing
4 REPLIES

SNMP

Does  Cisco SG200-50 50 port  gigabit smart switch have support for SNMP ? I have updated the firmware  and still can not find any option for snmp.

Sent from Cisco Technical Support iPad App

Hello ,

There is no support for SNMP on the SX 200 series, and traps refer to console or syslog messages only.

Check out the below link for reference

http://www.cisco.com/en/US/docs/switches/lan/csbss/sf20x_sg20x/release_notes/Sx200_RN1_1.0.0.19.pdf

Hope it Helps !!

Regards

Ganeshh Iyer

New Member

Re: SNMP

Thanks

Sent from Cisco Technical Support iPad App

Re: SNMP

Thanks

Sent from Cisco Technical Support iPad App

That Great The above post helps !!

Cheers

New Member

SNMP

There is support for the SG200-50 and SNMP since March 2013 with version 1.3.0.59 Upgrade firmware and bootcode.

http://software.cisco.com/download/release.html?mdfid=283771828&softwareid=282463182&release=1.1.2.0

Most recent version with firmware and bootcode in one package is Release 1.3.5.58

Release 1.3.7.18 has only firmware. You need bootcode as well. Download 1.3.5.58 and install bootcode via tfp. Then you can upload version 1.3.7.18

Backup configs. Warning long boot time after reload. about 6 minutes

3249
Views
5
Helpful
4
Replies
This widget could not be displayed.