Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMPv2 to SNMPv3 upgradation issue

Hi

When I am configuring my Cisco 1900 router for SNMPv3 ( migrating from snmp v2 to v3), the router is still sending SNMPv2 traps.

SNMPv2 config

snmp-server community STRING RO

snmp-server community public RO

snmp-server trap-timeout 180

snmp-server enable traps tty

snmp-server enable traps entity-sensor threshold

snmp-server host 192.168.10.18 STRING

SNMP V3 Config

snmp-server engineID local 192168000122

snmp-server trap-source loopback0

snmp-server enable traps snmp

snmp-server group branch v3 priv read v1default notify v1default

snmp-server view v1default iso included

snmp-server user netmon branch  v3 auth md5 password priv des password

snmp-server host 192.168.7.40 trap version 3 auth netmon  snmp

snmp-server host 192.168.7.40 inform version 3 auth netmon  snmp

snmp-server host 192.168.23.40 trap version 3 auth netmon  snmp

snmp-server host 192.168.23.40 inform version 3 auth netmon  snmp

I removed snmpv2 by doing no to all the commands and the did no snmp-server. After this I configured SNMP v3.

After the configuration when I enable the logs I am able to see the router is still sending the SNMPv2 traps

Please find some of the details which may be benifitial

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T1, RELEASE SOFTWARE (fc1)

PSIB0000122#sh snmp user

User name: netmon

Engine ID:192168000122

storage-type: nonvolatile     active

Authentication Protocol: MD5

Privacy Protocol: DES

Group-name: branch

Thanks Muklit

  • LAN Switching and Routing
Everyone's tags (5)
388
Views
0
Helpful
0
Replies