Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMPv3 Catalyst 6506 12.2(18)SXF14

                   Hi

                    We are unable to configure snmp v3 on the above.

                    Does anyone have a proper idiots guide for this ?

                    When adding a user there is no otion to add a "priv" level and I think this is why it doesnt work ?

         

                    snmp-server user ITOPS_IS NETMON v3 "(access)(auth)(encrypted)"   

                    snmp-server user ITOPS_IS NETMON v3 auth sha  Thissucks! (access)

Please help, this is so damned annoying .

Regards

Scott.

3 REPLIES

SNMPv3 Catalyst 6506 12.2(18)SXF14

Hi,

Below config worked for me (currently used).

snmp-server group TEST v3 auth read XYZ notify XYZ

snmp-server view XYZ iso included

snmp-server user USER1 TEST v3 auth sha priv aes 128

snmp-server host version 3 auth USER1

hth

MS

New Member

SNMPv3 Catalyst 6506 12.2(18)SXF14

Thats what I have been trying but do not get the "priv" option when adding the user.

SNMPv3 Catalyst 6506 12.2(18)SXF14

I guess you already created group. View also enabled? Not sure, if this is mandatory. Its been long time since I set this up and I remember doing some back and forth testing with settings.

Thx

MS

178
Views
0
Helpful
3
Replies