04-18-2012 02:28 PM - edited 03-07-2019 06:12 AM
We have over 30 Cisco 3560 switches and over 10 VLANs on our network. In our example, VLAN 10 on switch IP 10.0.20.150 works fine and VLAN 10 on switch IP 10.0.20.24 doesn’t work. The below are both switches show vlan (both switches’ configuration can be found this link: http://chicagotech.net/netforums/viewtopic.php?f=5&t=15731&sid=0e44d3b34ce5d36e297210a55ac6f64d). I can’t tell what causes the problem and how to fix it. VLAN 10 on Switch 10.0.20 24 doesn’t work: 3560_6#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4 Gi0/5, Gi0/6, Gi0/7, Gi0/8 Gi0/9, Gi0/10, Gi0/11, Gi0/12 Gi0/13, Gi0/14, Gi0/15, Gi0/16 Gi0/17, Gi0/18, Gi0/19, Gi0/20 Gi0/21, Gi0/22, Gi0/23, Gi0/24 Gi0/25, Gi0/26, Gi0/27, Gi0/28 Gi0/29, Gi0/30, Gi0/31, Gi0/32 Gi0/33, Gi0/34, Gi0/36, Gi0/37 Gi0/38, Gi0/39, Gi0/40, Gi0/41 Gi0/42, Gi0/44, Gi0/45, Gi0/46 Gi0/47, Gi0/48, Gi0/51, Gi0/52 4 CAFE_PUPLIC_WIRELESS active 100 TEACHER active 200 STUDENT active Gi0/43 254 ICN_OUTSIDE active 255 Ccast_55.254 active 256 Ccast_56.94 active 300 PUBLIC active 400 VPNDMZ active 500 DMZ2 active VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 600 WIRELESSTRUNK active 700 WLC_TRUNK_NATIVE active 800 SAN active 900 VENDOR active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 100 enet 100100 1500 - - - - - 0 0 200 enet 100200 1500 - - - - - 0 0 254 enet 100254 1500 - - - - - 0 0 255 enet 100255 1500 - - - - - 0 0 256 enet 100256 1500 - - - - - 0 0 300 enet 100300 1500 - - - - - 0 0 400 enet 100400 1500 - - - - - 0 0 500 enet 100500 1500 - - - - - 0 0 600 enet 100600 1500 - - - - - 0 0 700 enet 100700 1500 - - - - - 0 0 800 enet 100800 1500 - - - - - 0 0 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 900 enet 100900 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - srb 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary Type Ports ------- -------- ----------------- ------------------------------------------ VLAN 10 on Switch 10.0.20 150 works Switch#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Gi0/2, Gi0/3, Gi0/4, Gi0/5 Gi0/8, Gi0/9, Gi0/13, Gi0/23 Gi0/25, Gi0/26, Gi0/27, Gi0/28 4 CAFE_PUPLIC_WIRELESS active Gi0/1 10 VLAN0010 active Gi0/10, Gi0/22 20 HA-Cluster-LAN active 100 TEACHER active 200 STUDENT active Gi0/11, Gi0/12, Gi0/14, Gi0/15 Gi0/16, Gi0/17, Gi0/18, Gi0/19 Gi0/20 254 ICN_OUTSIDE active Gi0/6 255 Ccast_55.254 active 256 Ccast_56.94 active 300 PUBLIC active 400 VPNDMZ active 500 DMZ2 active 501 HYPER-V_HB active 502 HYPER-V_CSV active 503 HYPER-V_LM active 600 WIRELESSTRUNK active 700 WLC_TRUNK_NATIVE active VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 800 SAN active Gi0/21 900 VENDOR active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 100 enet 100100 1500 - - - - - 0 0 200 enet 100200 1500 - - - - - 0 0 254 enet 100254 1500 - - - - - 0 0 255 enet 100255 1500 - - - - - 0 0 256 enet 100256 1500 - - - - - 0 0 300 enet 100300 1500 - - - - - 0 0 400 enet 100400 1500 - - - - - 0 0 500 enet 100500 1500 - - - - - 0 0 501 enet 100501 1500 - - - - - 0 0 502 enet 100502 1500 - - - - - 0 0 503 enet 100503 1500 - - - - - 0 0 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 600 enet 100600 1500 - - - - - 0 0 700 enet 100700 1500 - - - - - 0 0 800 enet 100800 1500 - - - - - 0 0 900 enet 100900 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - srb 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary Type Ports
Solved! Go to Solution.
04-18-2012 03:14 PM
Hi, in the first switch there is not vlan 10 in the local database.
Sent from Cisco Technical Support iPad App
04-18-2012 04:44 PM
I am not Cisco engineer and not sure hwo to add the vlan 10 to the local database. could you please give more details?
conf t
vlan 10
end
04-18-2012 02:41 PM
In Switch 10.0.20 24, int g0/36 is configured for VAN 10
interface GigabitEthernet0/36
switchport access vlan 10
switchport mode access
flowcontrol receive desired
spanning-tree portfast
spanning-tree bpduguard enable
04-18-2012 03:12 PM
Geez ... the formating needs some work. I can't make heads or tails with this.
VLAN 10 on switch IP 10.0.20.24 doesn’t work.
On this switch, can you post the output to the command "sh int vlan 10"?
04-18-2012 03:14 PM
Hi, in the first switch there is not vlan 10 in the local database.
Sent from Cisco Technical Support iPad App
04-18-2012 04:39 PM
1. On both working and no working switch; sh int vlan 10 get the same error
Switch#sh int vlan 10 ^ % Invalid input detected at '^' marker.
2. in the first switch there is not vlan 10 in the local database: I am not Cisco engineer and not sure hwo to add the vlan 10 to the local database. could you please give more details?
04-18-2012 04:44 PM
I am not Cisco engineer and not sure hwo to add the vlan 10 to the local database. could you please give more details?
conf t
vlan 10
end
04-18-2012 05:15 PM
Thank you. Will get back to you soon.
04-18-2012 05:37 PM
It works after add vlan 10. Thank you very much!
04-18-2012 05:53 PM
Glad to see it work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide