Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

spa 8fe

Hello,

I'm interested to buy SPA-8X1FE-TX-V2 module in a 7604 with supervisor 32 but i'd like to know if it's possible to use etherchannel on those ports.

Anyone has tried that before? I didn't find any docs about that.

thanks,

Milko

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: spa 8fe

Hello Milko,

SPA modules are for WAN usage like running MPLS or other router features

And you need a SIP linecard in the chassis to use it.

Using them for building a port-channel can be a waste of resources: if you have already a SIP linecard with an empty SPA slot then it can be considered.

Use the following link to config guide of SIP/SPA

http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Finterfaces_modules%2Fshared_port_adapters%2Fconfiguration%2F7600series%2FSRC1%2F76cfgsip.html&pos=3&strqueryid=7&websessionid=a-9_mv69wl5b50M3XinBgaq

the answer looks like to be negative:

EtherChannel is only supported on the 10-Port Gigabit Ethernet SPA and the 1-Port 10-Gigabit Ethernet SPA on the Cisco 7600 SIP-600. EtherChannel is not supported on the 2-Port Gigabit Ethernet SPA on the Cisco 7600 SIP-400 or on a Fast Ethernet SPA on the Cisco 7600 SIP-200.

see

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/SRC1/76cfgeth.html#wp1181598

If you have a SIP200 it is not possible to config etherchannel

Hope to help

Giuseppe

1 REPLY
Hall of Fame Super Silver

Re: spa 8fe

Hello Milko,

SPA modules are for WAN usage like running MPLS or other router features

And you need a SIP linecard in the chassis to use it.

Using them for building a port-channel can be a waste of resources: if you have already a SIP linecard with an empty SPA slot then it can be considered.

Use the following link to config guide of SIP/SPA

http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Finterfaces_modules%2Fshared_port_adapters%2Fconfiguration%2F7600series%2FSRC1%2F76cfgsip.html&pos=3&strqueryid=7&websessionid=a-9_mv69wl5b50M3XinBgaq

the answer looks like to be negative:

EtherChannel is only supported on the 10-Port Gigabit Ethernet SPA and the 1-Port 10-Gigabit Ethernet SPA on the Cisco 7600 SIP-600. EtherChannel is not supported on the 2-Port Gigabit Ethernet SPA on the Cisco 7600 SIP-400 or on a Fast Ethernet SPA on the Cisco 7600 SIP-200.

see

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/SRC1/76cfgeth.html#wp1181598

If you have a SIP200 it is not possible to config etherchannel

Hope to help

Giuseppe

253
Views
0
Helpful
1
Replies