Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Span in IOS ?

Hi all, can i configure span in router ios ? i think we cant so is there any workaround to get a copy of all the packets rec on one interface to be sent to some other interface ?

Kindly guide me in this

2 REPLIES

Re: Span in IOS ?

Port monitoring is generally done in the switch, so you could configure port monitoring on your switch and set the port that the router connects to as the source and set your sniffer port as the destination.

HTH,

John

HTH, John *** Please rate all useful posts ***

Re: Span in IOS ?

You can also do a packet capture on the router itself (assuming that what you want to do). Requires 12.4T or later.

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6968/ps6441/product_bulletin_c25-409474.html#wp9002821

122
Views
0
Helpful
2
Replies
CreatePlease to create content