Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SPAN on Cisco router.

Hi all,

is it possible to configure port mirroring in Cisco router?

If no, how can I mirror traffic from one port to other?

Any idea?

BR

jl

6 REPLIES
Bronze

Re: SPAN on Cisco router.

bridge the two interfaces

HTH

Frank

Community Member

Re: SPAN on Cisco router.

Hi Frank,

pls could you explain me closer

(or recomend any document)how to do that.

Is it possible to bridge more interfaces to one like in a switch and than plug to that interface monitoring station?

BR

jl

Bronze

Re: SPAN on Cisco router.

This is 1 option, there are several others available.

Remember to connect your traffic analyzer to one the interfaces on the router to capture your traffic

Also, you really do not need to trunk the interfaces "encapsulation dot1Q" but here just in case you need to interface with a Cisco switch.

Also additional "direct-to-the-point" help

http://www.netcraftsmen.net/welcher/papers/irb.htm

Regards

Frank

bridge irb

!

interface FastEthernet0.100

encapsulation dot1Q 100 Native

bridge-group 1

!

interface FastEthernet0.200

encapsulation dot1Q 200

bridge-group 1

!

interface BVI1

ip address 192.168.1.1 255.255.255.0

!

bridge 1 protocol ieee

Hall of Fame Super Silver

Re: SPAN on Cisco router.

Hello John,

SPAN is not available on routers so it is not an option.

There is a new packet capture feature.

see

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps9913/datasheet_c78-502727.html

this can be possible or not on your router.

Hope to help

Giuseppe

Community Member

Re: SPAN on Cisco router.

Thanks Giuseppe,

we have 3600 series router so we cannot use this feature, but this feature is usable for me if decide to move to ISR series one.

BR

jl

Community Member

SPAN on Cisco router.

6209
Views
0
Helpful
6
Replies
CreatePlease to create content