hello guys,
I upgraded c6500 IOS to 12.2(18)SXF10a with IDS module. I need create monitor session, but one still exists and I can't remove it.
BB5-RS-DMZ-04>sh mod 9
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
9 8 Intrusion Detection System WS-SVC-IDSM-2 SAD084302G1
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
9 0003.e471.80e2 to 0003.e471.80e9 5.0 7.2(1) 5.1(4) Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
9 IDS 2 accelerator board WS-SVC-IDSUPG ADEI4201890 2.3 Ok
Mod Online Diag Status
---- -------------------
9 Pass
BB5-RS-DMZ-04#sh moni sess all
Session 2
---------
Type : Service Module Session
Modules allowed : 1-9
Modules active : 9
this session is not possible to delete (reason: maybe it's not local session, but Service Module Session. what that it's mean?):
BB5-RS-DMZ-04(config)#no monitor sess 2
% Session 2 used by service module
BB5-RS-DMZ-04(config)#monitor session 1 destination remote vlan 346
% Remote Source Session limit has been exceeded
can anybody help me?