Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPAN

Is it possible to configure SPAN destination port in a way that system on that port can be accessed from outside as well? By the i am using 3560 with IP services image.

Thanks in advance.

3 REPLIES
Cisco Employee

Re: SPAN

You can use the ingress keyword along with the destination port configuration to allow the traffic on to the connected system.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swspan.html#wp1260596

HTH, Please rate if it does.

-amit singh

New Member

Re: SPAN

What we do is attach 2 nics to the host device, this way the host can say be running Wireshark and we access the host through the other nic on the LAN.

HTH,

Brandon

New Member

Re: SPAN

I'd have to agree with Brandon. You generally don't want to capture both the SPAN traffic and your normal traffic. It is MUCH better to keep them separated.

Paul

116
Views
0
Helpful
3
Replies