Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Spanning Multiple VLANS between sites

I am looking at ways to span 4 vlans currently configured at one site to another site.

The VLANs are configred on a 6509 which is connected to 3845 with a T3 connection to the remote site. The remote site where I need to span the VLANs to has a 6506.

I will also need to take in consideration the ISP equipment. At the main site, the T3 in my 3845 terminate onto the ISP 7206VXR

at the remote site My 6506 connects to th ISP switch, so I believe there are additional ISP equipment in the mix.

What is the best way to span these VLANs. It is required to replicate VMs at the remote site.

Thank you for your help

2 REPLIES
Hall of Fame Super Silver

Re: Spanning Multiple VLANS between sites

Hello Ramzi,

L2TPv3 can carry Vlan based 802.1Q subifs over an IPv4 network.

It should be supported on both routers

see

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html

and for vlan based L2tpv3

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html#wp1046193

Hope to help

Giuseppe

New Member

Re: Spanning Multiple VLANS between sites

Giuseppe,

Thank you for the reply. i will try this the next scheduled maintenance.

Thank you,

Ramzi

111
Views
0
Helpful
2
Replies