I have an old 3500 XL switch I want to install on my network temporarily for some users. The IOS support only ibm and ieee spanning tree. I configured the interfaces into a vlan and enable portfast on them and changed my spanning-tree priority for the vlan to 65535 (so it doesn't attempt to become the root). On the network, the other access switches (3750's) are running PVST. Is there anything I still need to change to be on the safe side. Oh! i also deleted the vlan database and made it a transperate switch with the defualt domain and I made sure all the ports are access ports.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...