Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

spanning-tree loop

How does one identify spanning-tree loop in the network?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: spanning-tree loop

One way is the offending switchport should go into err-disable. You could look for that, or check the local log, SYSLOG, or setup SNMP Trap.

1 REPLY

Re: spanning-tree loop

One way is the offending switchport should go into err-disable. You could look for that, or check the local log, SYSLOG, or setup SNMP Trap.

189
Views
0
Helpful
1
Replies
CreatePlease to create content