Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Spanning Tree Messages

Please what that mean

eated msg
14796012: Jan 26 09:12:13.763: RSTP(1): Gi0/22 rcvd info remaining 6
14796013: Jan 26 09:12:13.763: STP: VLAN0002 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype SSTP , enctype 3, encsize 22
14796014: Jan 26 09:12:13.763: STP: enc 01 00 0C CC CC CD 00 1B 90 7A 2B 34 00 32 AA AA 03 00 00 0C 01 0B
14796015: Jan 26 09:12:13.763: STP: Data     000002023C8002001B907A2B00000000008002001B907A2B0080340000140002000F00
14796016: Jan 26 09:12:13.763: STP: VLAN0002 Gi0/22:0000 02 02 3C 8002001B907A2B00 00000000 8002001B907A2B00 8034 0000 1400 0200 0F00
14796017: Jan 26 09:12:13.763: RSTP(2): Gi0/22 repeated msg
14796018: Jan 26 09:12:13.763: RSTP(2): Gi0/22 rcvd info remaining 6
14796019: Jan 26 09:12:13.763: STP: VLAN0003 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype SSTP , enctype 3, encsize 22
14796020: Jan 26 09:12:13.763: STP: enc 01 00 0C CC CC CD 00 1B 90 7A 2B 34 00 32 AA AA 03 00 00 0C 01 0B
14796021: Jan 26 09:12:13.763: STP: Data     000002023C8003001B907A2B00000000008003001B907A2B0080340000140002000F00
14796022: Jan 26 09:12:13.763: STP: VLAN0003 Gi0/22:0000 02 02 3C 8003001B907A2B00 00000000 8003001B907A2B00 8034 0000 1400 0200 0F00
14796023: Jan 26 09:12:13.763: RSTP(3): Gi0/22 repeated msg
14796024: Jan 26 09:12:13.763: RSTP(3): Gi0/22 rcvd info remaining 6
14796025: Jan 26 09:12:14.006: RSTP(3): sending BPDU out Gi0/1
TP: VLAN0010 Gi0/22:0000 02 02 3C 800A001B907A2B00 00000000 800A001B907A2B00 8034 0000 1400 0200 0F00
14796309: Jan 26 09:12:22.814: RSTP(10): Gi0/22 repeated msg
14796310: Jan 26 09:12:22.814: RSTP(10): Gi0/22 rcvd info remaining 6
14796311: Jan 26 09:12:23.066: RSTP(1): sending BPDU out Gi0/4
14796312: Jan 26 09:12:23.066: RSTP(1): sending BPDU out Gi0/6
14796313: Jan 26 09:12:23.066: RSTP(1): sending BPDU out Gi0/11
14796314: Jan 26 09:12:23.066: RSTP(1): sending BPDU out Gi0/23
14796315: Jan 26 09:12:23.066: RSTP(2): sending BPDU out Gi0/23
14796316: Jan 26 09:12:23.066: RSTP(4): sending BPDU out Gi0/12
14796317: Jan 26 09:12:23.066: RSTP(4): sending BPDU out Gi0/13
14796318: Jan 26 09:12:23.066: RSTP(4): sending BPDU out Gi0/17
14796319: Jan 26 09:12:23.066: RSTP(4): sending BPDU out Gi0/23eated msg
14796272: Jan 26 09:12:21.816: RSTP(1): Gi0/22 rcvd info remaining 6
14796273: Jan 26 09:12:21.816: STP: VLAN0002 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype SSTP , enctype 3, encsize 22
14796274: Jan 26 09:12:21.816: STP: enc 01 00 0C CC CC CD 00 1B 90 7A 2B 34 00 32 AA AA 03 00 00 0C 01 0B
14796275: Jan 26 09:12:21.816: STP: Data     000002023C8002001B907A2B00000000008002001B907A2B0080340000140002000F00
14796276: Jan 26 09:12:21.816: STP: VLAN0002 Gi0/22:0000 02 02 3C 8002001B907A2B00 00000000 8002001B907A2B00 8034 0000 1400 0200 0F00
14796277: Jan 26 09:12:21.816: RSTP(2): Gi0/22 repeated msg
14796278: Jan 26 09:12:21.816: RSTP(2): Gi0/22 rcvd info remaining 6
14796279: Jan 26 09:12:21.816: STP: VLAN0003 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype SSTP , enctype 3, encsize 22
B00 8034 0100 1400 0200 0F00
14796330: Jan 26 09:12:23.821: RSTP(4): Gi0/22 repeated msg
14796331: Jan 26 09:12:23.821: RSTP(4): Gi0/22 rcvd info remaining 6
14796332: Jan 26 09:12:23.821: STP: VLAN0001 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype IEEE_SPANNING , enctype 2, encsize 17
14796333: Jan 26 09:12:23.821: STP: enc 01 80 C2 00 00 00 00 1B 90 7A 2B 34 00 27 42 42 03
14796334: Jan 26 09:12:23.821: STP: Data     000002023C8001000F8F6E5240000000138001001B907A2B0080340100140002000F00
14796335: Jan 26 09:12:23.821: STP: VLAN0001 Gi0/22:0000 02 02 3C 8001000F8F6E5240 00000013 8001001B907A2B00 8034 0100 1400 0200 0F00
14796336: Jan 26 09:12:23.821: RSTP(1): Gi0/22 repeated msg
14796337: Jan 26 09:12:23.821: RSTP(1): Gi0/22 rcvd info remaining 6
14796338: Jan 26 09:12:23.821: STP: VLAN0002 rx BPDU: config protocol = rstp, packet from GigabitEthernet0/22  , linktype SSTP , enctype 3, encsize 22
14796339: Jan 26 09:12:23.829: STP: enc 01 00 0C CC CC CD 00

Thank You

1 ACCEPTED SOLUTION

Accepted Solutions

It seems that on this switch

It seems that on this switch you have debug on for spanning tree events. Just turn off the debug with the undebug all command.

Cheers,

4 REPLIES

Hi,

Hi,

Do you any issues with your topology? 

Cheers, 

New Member

Till Now, My network works

Till Now, My network works well, I have Four Cisco Switches, and one Nomanageable switch, linked with Bus topology. and i have this messages logging in one of them.

It seems that on this switch

It seems that on this switch you have debug on for spanning tree events. Just turn off the debug with the undebug all command.

Cheers,

New Member

Thank You Konstantinoschi it

Thank You Konstantinoschi it was the right answer. :)

41
Views
0
Helpful
4
Replies
CreatePlease login to create content