Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

spanning-tree portfast bpduguard default

Hi NetPro,

just have a quick check , with this command will only apply to Access switch only ? or deploy to Core-switches , Distribution switches ?

your reply will be highly appreciated.

thanks.

regards,

Jackal

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: spanning-tree portfast bpduguard default

Quick guess - access ports only.....

Re: spanning-tree portfast bpduguard default

The command is configurable on any switch but in practice will be genrally configured on the access switches.

The Core/distribution switches would mostly carry only trunk uplinks or L3 routed ports and hence it is not configured

HTH

Narayan

3 REPLIES
New Member

Re: spanning-tree portfast bpduguard default

Quick guess - access ports only.....

Re: spanning-tree portfast bpduguard default

The command is configurable on any switch but in practice will be genrally configured on the access switches.

The Core/distribution switches would mostly carry only trunk uplinks or L3 routed ports and hence it is not configured

HTH

Narayan

Re: spanning-tree portfast bpduguard default

Portfast is generally enabled on all ports to which the enduser desktops are connected.

Access switches are generally meant for that. So mainly on access switches or any desktop connected ports.

173
Views
5
Helpful
3
Replies