Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Spanning Tree Portfast

I have a 3560G that is the def gw for most of my net, as well as root of Spanning Tree. All my sites connect into this box via fiber, most of the main servers plug into this box, as well as Unity and CCM, etc.

Anyways, here is one port:

interface GigabitEthernet0/5

description Connection to PIX Firewall

spanning-tree portfast

Should I have portfast set on this port? Any harm by taking it off?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Spanning Tree Portfast

2 REPLIES
Hall of Fame Super Silver

Re: Spanning Tree Portfast

Hello Doug,

spanning-tree is useful on user ports : that includes ports where router or firewall connects.

If the PIX is acting as a routed firewall it is not transparent you can keep it

STP portfast reduce the time to STP forwarding state knowing that no switch is connected on the port so it is useful on PCs and workstations to reduce time to up.

It also provide more STP stability: a change of state in a portfast port doesn't trigger a topology change notification

This avoids a useless STP recalculation.

Hope to help

Giuseppe

Silver

Re: Spanning Tree Portfast

657
Views
4
Helpful
2
Replies