Re: Spanning Tree problem / physical connection between two vlan
What do you mean by "physical interconnection"?
If you have two VLANs on one switch, they won't be able to interconnect users between each VLAN unless you have configured interface vlan 900 on you swich (and interface vlan 10 as well). This will act as a L3 interface and thus switch will be able to interconnect the users from both VLANs. You can then shutdown VLAN 900 L3 port by
interface vlan 900
Or if you have an uplink router connected to this switch and you are trunking both VLANs (10 and 900) to this router, you can connect users in these two VLANs.
You can chcec correct trunking on your switch by:
show interface XY trunk
Without L3 interfaces, users in VLAN10 and VLAN900 are separeted.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.