Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Spanning tree question

how does one compute the total start up delay of a link. is it

2x forwarding delay or

hello+maxage+ 2x forwarding delay

Thanks

2 REPLIES

Re: Spanning tree question

maxage + 2 forward delay , 20 + 2x15 = the dreaded 50seconds :-)

Pls rate all helpful posts

HTH

Sam

Re: Spanning tree question

With regular STP, default timers, a designated port takes 2xforward_delay to go from discarding (blocking) to forwarding. When a port is coming up, it has by default a designated role and will thus take 30 seconds to go forwarding, unless you configure it for portfast.

When a port has an alternate or backup role, i.e. this port has been determined as redundant because it is receiving better bpdus, it is in also in discarding state. If this port fails to receive any better bpdus in max_age (20 seconds by default), it will move to designated role, and we are back to the previous case. But in that case, the complete transition from discarding to forwarding will take max_age + 2x forward_delay = 50 seconds.

RSTP and MST are designed to converge without using any timers (in an appropriate network with edge port identified and point-to-point links). Those protocols can thus provide sub-second reconvergence.

Regards,

Francois

145
Views
15
Helpful
2
Replies