I believe port 3/16 was configured for vlan 130 which is been removed now. Can you check the config for port 3/16 and update?
The message indicates a port was deleted from a VLAN via a telnet session. telnet145 is the telnet process ID.
You are seeing these messages because you have set the spantree logging level to 7 (which will generate informational messages). Default for spantree is 5 and can be changed using "set logging level spantree 5 default".
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...