special req for DNS server behind nat? (cisco 7200 vxr)
At work, we have a cisco 7200 vxr router with some 1-to-1 nats on it (external ip <----> internal IP)
We are delegated a whole C class and only use about 8 of them. I have a dns server on host 172.16.0.6 (18.104.22.168) for names.ehome411.net . It seems like the server is working, but it won't serve out host information contained in the zone file. The config has been verified at a friends house and a friends business, but does not work behind our router. I am not really a cisco guy and the cisco admin here is a new CCNA and doesn't know anything about network services other then what was taught.
After talking with numerous people and verifying my config and my firewall rules, they asked me about the NAT rules. I am not sure what they meant, so I figured i would get someone to take a look at the config to see if i need to do anything else..
http://22.214.171.124/run.txt <-- there is the config. 1/4 of the config is old stuff that doesnt ever work, but the admin keeps it in there for some reason..
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...