Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

splitting vlan traffic

i have several cisco sg300's (in L2 mode) and i would like to have certain vlan traffic go through 1 fiber port and other vlan traffic go through the other fiber port.

i'm using vlan 100 for data(untagged) and vlan 200 for voice(tagged)

ports 1-24 have vlan 100 and 200

the fiber port g27 i have set up as vlan100 untagged

and fiber port g28 is using vlan 200tagged

yet no traffic is passing through

any help would be appreciated

Everyone's tags (3)
1 REPLY
New Member

splitting vlan traffic

you can use

Spanning tree MST

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfc.shtml

where you use double trunk but with different priority for certain vlan

document for SR300

http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/CLI_300_1_2_5.pdf

Regards

182
Views
0
Helpful
1
Replies