Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRM or NSF

i have router 7606 ,with 2 supervisor engines ( 720 ) ,

i configured sso redundancy as follows:

redundancy

mode sso

main-cpu

auto-sync running-config

so how can i verify that the working mode is NSF or SRM?

3 REPLIES
Blue

Re: SRM or NSF

Hi:

What version of code are you running?

After 12.2(18)SXF, SRM is not an option and NSF is automatically enabled.

HTH

Victor

New Member

Re: SRM or NSF

iam using s72033-advipservicesk9_wan-mz.122-18.SXF11.bin

Blue

Re: SRM or NSF

Hi, David:

12.2(18) SXF11 does not support SRM with sso. The default is NSF. SRM is not supported for any software version later than 12.2(18)SXD

To verify that the NSF feature exists, you can query the switch under the roouter configuration mode prompt.

Example:

Router# config t

Router(config)# router ospf 2004

Router(config-router)# ?

Then look for the the NSF option.

Also, take note that CEF NSF is enabled by default once SSO is configured.

HTH

Please rate my post if it helped you.

Victor

241
Views
0
Helpful
3
Replies