Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSH Central User Accounts

I have 3 switches a (1)3550, (2)2960 that are trunked with VLANs. I have SSH on configured on one of the 2960 with a username and password. I would like to remove the SSH config on the 2960 switch and put it on the 3550 and use the 3550 as the central location for all the usernames that are created so that there is only one logon and password for all three.

Is that possible with the equipment I currently have or do I just need to configure them individually?

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: SSH Central User Accounts

You need to configure them locally on each switch. If you want a central database of users, you need to look at a radius or tacacs server and use AAA on your switches.

Hope that helps

Re: SSH Central User Accounts

Hi,

I don't think it is possible to configure the 3550 switch to work as an Authentication server for other switches.

Instead you could use Cisco Secure ACS sever for this purpose.

Or if you are looking for something free, then you could opt for some radius server like

- Freeradius ( freeradius.org/ ) or

- Zeroshell (http://www.zeroshell.net/eng/ )

here is an example for configuring Zeroshell for Cisco.

http://www.addressplus.net/ZeroShell-Cisco-RADIUS.pdf

Hope this helps.

3 REPLIES

Re: SSH Central User Accounts

You need to configure them locally on each switch. If you want a central database of users, you need to look at a radius or tacacs server and use AAA on your switches.

Hope that helps

Re: SSH Central User Accounts

Hi,

I don't think it is possible to configure the 3550 switch to work as an Authentication server for other switches.

Instead you could use Cisco Secure ACS sever for this purpose.

Or if you are looking for something free, then you could opt for some radius server like

- Freeradius ( freeradius.org/ ) or

- Zeroshell (http://www.zeroshell.net/eng/ )

here is an example for configuring Zeroshell for Cisco.

http://www.addressplus.net/ZeroShell-Cisco-RADIUS.pdf

Hope this helps.

New Member

Re: SSH Central User Accounts

Thank you for your input. I will be looking into the ZeroShell

267
Views
0
Helpful
3
Replies