Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ssh for 2611 router

I have tried to configure ssh on 2611 router but there is no 'crypt key generate rsa' command in global configuration mode.

Hear is the result of 'show version' command. Any ideas why? Thanks

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.3(6a), RELEASE SOFTWARE (fc4)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Fri 02-Apr-04 19:17 by kellythw

Image text-base: 0x80008098, data-base: 0x80C83D68

ROM: System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)

router6 uptime is 29 weeks, 4 hours, 40 minutes

System returned to ROM by reload at 14:33:45 EST Fri Mar 13 2009

System image file is "flash:c2600-i-mz.123-6a.bin"

cisco 2611 (MPC860) processor (revision 0x00) with 26624K/6144K bytes of memory.

Processor board ID JAD06150TU3 (3727349761)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

2 Ethernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

router6#$rocessor (revision 0x00) with 26624K/6144K bytes of memory.

cisco 2611 (MPC860) processor (revision 0x00) with 26624K/6144K bytes of memory. ^

% Invalid input detected at '^' marker.

router6#Processor board ID JAD06150TU3 (3727349761)

4 REPLIES

Re: ssh for 2611 router

you need a crypto IOS image for SSH.

New Member

Re: ssh for 2611 router

Thank you. Do you know where can I get it?

Re: ssh for 2611 router

Yes, you can download this from cisco.com:

http://www.cisco.com/public/sw-center/index.shtml

Purple

Re: ssh for 2611 router

Yes you need a new image for the router. The image name will have a "K9" somewhere in the image name indicating it is a crypto image that will support SSH .

1191
Views
8
Helpful
4
Replies