Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSH Issue from PC to Server through Cisco 4500

the user and the pc are on different vlans but they are both connected to the same 4500 switch.

The user said he was able to reach the server at one time.

I can ping the server from the pc.

I cannot ssh from the pc to the server through the 4500.

I can ssh from the 4500 to the server.

There are no ACLs on the 4500.

Any ideas??

Thank you

9 REPLIES
Hall of Fame Super Gold

Re: SSH Issue from PC to Server through Cisco 4500

Can you ssh from your PC to the 4500?

If not, please check for the following commands are present:

line vty 0 15

transport input ssh

or

transport input all

New Member

Re: SSH Issue from PC to Server through Cisco 4500

Yes, I can ssh from the PC to the 4500.

Purple

Re: SSH Issue from PC to Server through Cisco 4500

If no acls then the switch should have no bearing . Different SSH versions on the devices ???

New Member

Re: SSH Issue from PC to Server through Cisco 4500

the switch is using version 1.99 and i can ssh to the server from there.

only when im on my pc i cant ssh. im on a different vlan than the server, but both my pc and the server are directly connected to the switch and i can ping the server from my pc.

New Member

Re: SSH Issue from PC to Server through Cisco 4500

Just to add to the madness, when I do a traceroute from another switch not directly connected to the server, I get a bunch of question marks. I can however ping the server address.

New Member

Re: SSH Issue from PC to Server through Cisco 4500

Hi

1. Please let me know whether you are trying to do the ssh to ip address of server or name of the server. If name please try to do with ip address of server.

2. What is the output of this command

telnet 22 if it is blank screen we should check in the sever policies.

New Member

Re: SSH Issue from PC to Server through Cisco 4500

I'm using the ip when trying to ssh. I'll check the results of the telnet test when I get to work. What would that test result tell me exactly?

New Member

Re: SSH Issue from PC to Server through Cisco 4500

The command telnet 22

is trying to telnet port 22 (ssh).

If you are getting blank screen after u enter this command means there is no problem on your switch and we can start checking the policies on server side.

New Member

Re: SSH Issue from PC to Server through Cisco 4500

this is what happens when i try that in a cmd prompt:

telnet XX.XXX.XXX.40 22

Connecting To XX.XXX.X.40...Could not open connection to the host, on port 22:

Connect failed

378
Views
0
Helpful
9
Replies