Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSH issue in 2940

Hi,

Currently i am using c2940-i6k2l2q4-mz[1].121-22.EA10 in which i am not able to enable SSH for remote login, c2940-i6k2l2q4-mz[1].121-22.EA12.bin, but it give an error PERMISSION DENIED.

Please let me know what IOS version will support SSH & from where do i can download that IOS for my 8-100 Mbps & 1 Gigabit (cisco C-2940- 8TT-S

3 REPLIES
Purple

Re: SSH issue in 2940

That is a correct crypto version to support the ssh function . It must be a config problem . Make sure you have allowed ssh on the vty lines.

basic steps are

ip domain name

crypto key generate rsa

key size 1024

line vty 0 15

transport input SSH

New Member

Re: SSH issue in 2940

Hi,

Its giving me to install Ip domain name, but not giving me to install the Crypto in configuration mode & also in line vty.

I have tried using .E10b.bin & E4a.bin

in E12.bin which i mentioned earlier, when try to boot, it gives me Permission Denied & boot from E10b.bin file.

Thanks..

Purple

Re: SSH issue in 2940

This is the crypto version , if this is what you have on your boxes it should work . The filename has to be exact . I have this same version working with SSH on 2940's .

Crypto version (SSH)

c2940-i6k2l2q4-mz.121-22.EA10a.bin

non crypto version (no SSH)

c2940-i6q4l2-mz.121-22.EA10a.bin

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

1406
Views
0
Helpful
3
Replies